The Model 2900XP Track is an extremely versatile stump grinder. It is self-propelled with a Chermack "turf-friendly" rubber track undercarriage and is best suited for traveling over rough, soft soil conditions. The 'turf-friendly' rubber track undercarriage can be expanded out to 53 inches in width for stability, and it can be retracted to 35 inches in width allowing it to fit through a 36 inch backyard gate. The Model 2900XP Track has excellent flotation, allowing it to travel over yards with minimal damage. Engine options from 84.5 to 114 horsepower are available making this unit very productive, especially when tackling large diameter stumps in a lot clearing setting.
|The cutting system of Model 2900XP Track offers enormous dimensions and power thus the need to reposition the unit while grinding a stump is minimized. A stocky 25 inch diameter by 1-1/2 inch thick cutterwheel is hydrostatically driven by a polychain belt run by a 100 cc hydraulic motor. Using over-sized bearings, the side loads and shock loads associated with the sweeping patterns of grinding are more absorbed and contained. This promotes a smoother cut and ultimately reduces stresses and vibration cast upon other components of the machine ensuring a longer life for your stump grinder. At the job site, the cutterwheel on the Model 2900XP Track can swing a vast 74 inches to cover a broad area of the ground surface. In combination with a cutting height of 31-1/2 inches and dipping to a cutting depth of nearly 26 inches, the volume of material that can be processed from one position is maximized.|
|When it comes to operator controls and travel, the Model 2900XP offers a lot of flexibility. With a standard radio remote control with tether back-up, the operator can control the cutterwheel up and down movement, cutterwheel swing (left or right), throttle, cutter wheel engagement, all drive functions, track expansion and retraction, and emergency stop from a distant location. It also allows the operator to seek out a position for better visibility when grinding. The three-speed drive system (high, low, and creep) allows the 2900XP Track to quickly reach the stump, maneuver into position, and then have its speed precisely controlled with fine-tuned increments for easing into the stump while grinding.|
|An optional hydraulic grading blade is available and recommended for assisting with the cleanup after a stump is removed. This option can reduce the amount of manual labor involved in either removing the chips or filling in the remaining hole. Choose between 35 or 53 inch widths.|
|All Bandit stump grinders, including the Model 2900XP Track, are built with a solid chassis construction using continuous steel welds as opposed to bolt-together techniques to provide years of dependable service for homeowners, rental companies, tree care companies, and land clearing operations. A full palette of standard and custom paint colors give you the freedom to choose the look of your brand or company.|
|The Model 2900XP Track, as with all Bandit stump grinders, is also designed with operator safety in mind. With standard devices such as guards, switches, and locking pins, Bandit stump grinders can provide years of dependable and productive service in combination with proper training. Components on these machines are also easily accessible to save time on routine maintenance schedules and reduce downtime by being more serviceable out in the field. Backed by a factory and worldwide dealer support network for parts and service, Bandit stump grinders have earned the reputation of being best economical decision you can make for a long-term investment stump grinder.|